mountz蒙士无刷电动螺丝刀[产品打印页面]

Brushless Electric Screwdrivers

• Various models that range from 0.08 - 24.3 lbf.in
• Electric Screwdrivers feature a high performance Swiss Maxon brushless motor design that provides durability and reduces the standard maintenance costs for electric screwdrivers.
• Low inertial force provides smooth reaction-less operation with little G force to assembled parts.
• Low noise, vibration and maintenance.

Built-in Screw Counter

• Detection of fastening error and displays error condition.
• Visual assembly fastener count (count up or down), including total count.
• Real time monitoring by PC program.
• Detects - cross threading, omissions, unfinished rundowns and cycle complete.
• Programmable screw counter settings.
• 0 to 99 screws

Controller

• Programmable digital torque setting with memory for 8 preset torque settings.
• Real-time monitoring and torque control of the tightening process.
• Real time torque data and curve display (Speed vs Torque or Angle vs Torque).
• Real time fastening data output (USB, RS-232C).
• Selectable speed settings.
• Programming and monitoring with Smart-Manager (PC software).
• Programmable multi-sequence operation.
• Displays error information by code.
• Maintenance information and history memory. Firmware upgrade by Com port.

• Sequence setting (Preset #).
• Fastening torque.
• Fastening process status (OK/NG).
• Torque unit setting.
• Preset torque setting.
• Preset speed and actual RPM.
• Count setting and remaining screw count.
• Turns and fastening time.

• Four selectable units of torque measurements: ozf.in, lbf.in, cN.m, Kgf.cm.
• Selectable settings for Torque, Speed, Min & Max Angle, and Soft Start time.
• Maximum angle control and verification
• Minimum angle control and error reporting

• Auto
• Start (Continuous on)
• Start Pulse with time limit
• Start Pulse and Finish pulse

I/O Interface & Settings

• 25P I/O interface to a PLC or 8 direct sensor ports.
• Sensor ports for preset selection and screw counting.
• Input via sensor ports for presets.
• Input / Output for PLC.

Motor Run Time Limits

• Motor run time limits, forward and reverse.
• Motor stall time limit.
• Sleep time.
• Motor acceleration for soft start.

Output Signal Types

• Count complete
• Torque up and Count complete
• Alarm, screw missing