mountz美国蒙士脉冲气动扳手FLEX-30SX[产品打印页面]

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: mountz美国蒙士脉冲气动扳手FLEX-30SX

产品型号: FLEX-30SX

产品展商: 美国蒙士mountz

产品价格: 0.00 元

折扣价格: 0.00 元

产品文档: 无相关文档

简单介绍

mountz美国蒙士脉冲气动扳手FLEX-30SX mountz美国蒙士脉冲气动扳手FLEX-30SX

mountz美国蒙士脉冲气动扳手FLEX-30SX 的详细介绍

mountz美国蒙士脉冲气动扳手FLEX-30SX

Various models that range from 4.4 - 34.6 lbf.ft
Designed to enhance cycle time with high-speed rundown.
Excellent power-to-weight ratio.
Safe ergonomic selection - low noise decibels, minimal vibration & reaction free operation.
Comfortable rubberized non-slip grips for easy handling and excellent thermal ergonomics.
Specially designed pulse fluid extends life between oil changes and provides better torque stability. Double sealing increases performance and reduces maintenance.
Shut-off and non shut-off models.
Ergonomically safer than harmful hammering and vibration of impact wrenches.
Pin Dentent included with square drive models.

mountz美国蒙士脉冲气动扳手FLEX-30SX

Models	Item #	Drive Type	lbf.ft*	N.m*	Free Speed (RPM)*	Avg. Air Consumption m³/min CMM	Avg. Air Consumption ft³/min CFM	Hose Size in (mm)
FLEXS-30SX	360122	1/4" F/Hex	4.4 - 9.2	6 - 12.5	4200	0.25	8.80	1/4" (6.5)
FLEXS-40SX	360123	1/4" F/Hex	7.4 - 13.2	10 - 18	4200	0.25	8.70	1/4" (6.5)
FLEXS-40S	360124	3/8" Sq. Dr	8.1 - 14	11 - 19	4200	0.25	8.80	1/4" (6.5)
FLEXS-50SX	360125	1/4" F/Hex	10.3 - 19.1	14 - 26	7200	0.35	12.30	1/4" (6.5)
FLEXS-50S	360126	3/8" Sq. Dr	11.1 - 19.9	15 - 27	7200	0.35	12.30	1/4" (6.5)
FLEXS-60SX	360127	1/4" F/Hex	14.8 - 22.1	20 - 30	6000	0.40	14.10	3/8" (8)
FLEXS-60S	360128	3/8" Sq. Dr	16.2 - 25.8	22 - 35	6000	0.40	14.10	3/8" (8)
FLEXS-70S	360129	3/8" Sq. Dr	22.8 - 34.6	31 - 47	5000	0.40	14.10	3/8" (8)

Non Shut-Off Models (Torque Ranges)

Models	Item #	Drive Type	lbf.ft*	N.m*	Free Speed (RPM)	Avg. Air Consumption m³/m CFM	Avg. Air Consumption ft³/m CFMin	Hose Size in (mm)
FLEX-30SX	360130	1/4" F/Hex	4.4 - 9.2	6 - 12.5	4200	0.25	8.80	1/4" (6.5)
FLEX-40SX	360131	1/4" F/Hex	7.4 - 13.2	10 - 18	4200	0.25	8.70	1/4" (6.5)
FLEX-40S	360132	3/8" Sq. Dr	8.1 - 14	11 - 19	4200	0.25	8.80	1/4" (6.5)
FLEX-50SX	360133	1/4" F/Hex	10.3 - 19.1	14 - 26	7200	0.35	12.30	1/4" (6.5)
FLEX-50S	360134	3/8" Sq. Dr	11.1 - 19.9	15 - 27	7200	0.35	12.30	1/4" (6.5)
FLEX-60SX	360135	1/4" F/Hex	14.8 - 22.1	20 - 30	6000	0.40	14.10	3/8" (8)
FLEX-60S	360136	3/8" Sq. Dr	16.2 - 25.8	22 - 35	6000	0.40	14.10	3/8" (8)
FLEX-70S	360137	3/8" Sq. Dr	22.8 - 34.6	31 - 47	5000	0.40	14.10	3/8" (8)

Specifications

Models	Models	Wt Lbs.	Wt kgs	P/W Nm/kgs	Length in.	Noise Level dBa
FLEX-30SX	FLEX-30SX	1.7	0.76	16.4	8.8	78.0
FLEXS-40SX	FLEX-40SX	1.8	0.80	22.5	8.8	78.0
FLEXS-40S	FLEX-40S	1.8	0.80	23.8	8.7	78.0
FLEXS-50SX	FLEX-50SX	1.8	0.80	32.5	8.8	80.0
FLEXS-50S	FLEX-50S	1.8	0.80	33.8	8.7	80.0
FLEXS-60SX	FLEX-60SX	1.9	0.85	35.3	9.2	80.0
FLEXS-60S	FLEX-60S	1.9	0.85	41.2	9.1	80.0
FLEXS-70S	FLEX-70S	2.1	0.96	49.0	9.5	80.0

Note! *Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools.

All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 85 PSI (Pounds per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz digital torque wrench.

mountz美国蒙士脉冲气动扳手FLEX-30SX

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!