松下数字光纤传感器 FX-410[产品打印页面]

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 松下数字光纤传感器 FX-410

产品型号: FX-411P

产品展商: Panasonic松下

产品价格: 0.00 元

折扣价格: 0.00 元

产品文档: 无相关文档

简单介绍

松下数字光纤传感器 FX-410 的详细介绍

这款双显示数字光纤传感器的独特之处在于其手动阈值设置。只需“看”和“转动”简单易用的光纤放大器。只需进行操作即可同时检查入射光强度和阈值。此外，调整值时无需复杂的模式设置。

规格

Specifications table for model FX-411P
Item	Performance characteristics
CE Marking Directive Compliance	EMC Directive, RoHS Directive
Supply Voltage	12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power Consumption	Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
Output	PNP open-collector transistor • Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade) • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output: Output Operation	Switchable either Light-ON or Dark-ON
Output: Short-Circuit Protection	Incorporated
Response Time	150 μs or less (FAST), 500 μs or less (STD), 4.5 ms or less (U-LG) selectable with setting switch
Operation Indicator	Orange LED (lights up when the output is ON)
Stability Indicator	Green LED (lights up under stable light received condition or stable dark condition)
Timer Function	Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. [Timer period (Note): 1 ms to 3 sec. approx. (1 to 10 ms: Setting possible in units of 1 ms, 10 to 100 ms: Setting possible in units of 10 ms, 100 to 500 ms: Setting possible in units of 50 ms, 500 ms to 1 sec.: Setting possible in units of 100 ms, 1 to 3 sec.: Setting possible in units of 500 ms)] (Note):For models manufactured up until June 2005, the timer period is approx. 1 to 500 ms.
Automatic Interference Prevention Function	Incorporated (Up to four sets of fiber heads can be mounted close together. However, U-LG mode is 8 fiber heads.) (Note:When the power supply is switched on, the light emission timing is automatically set for interference prevention.)
Ambient Temperature	–10 to +55 ℃ –14 to +131 ℉ (If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
Ambient Humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient Illuminance	Incandescent light: 3,000 ℓx or less at the light-receiving face
Voltage Withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure (Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.)
Insulation Resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.)
Vibration Resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance	98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting Element (Modulated)	Red LED
Emitting Element (Modulated): Peak Emission Wavelength	650 nm 0.026 mil
Material	Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Cable Length	Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm², or more, cable.
Weight (Typ.)	Net weight: 20 g approx., Gross weight: 30 g approx.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!